OCF Foam Sealant
Range of application: doors and windows, construction, air-conditioner and refrigerator
Application: patching, padding
Usage
Seals around windows,doors, and baseboard
Fills cracks and joints,gaps around pipes,vents and electrical outlets
Seals and insulates gap between various walls
Directions
Wear protective gloves,goggles and work clothes during use.
Clean surfaces of dirt,grease and dust,then moistening the cavity
Use between 5-40℃
Shake can for 2 minutes vigorously
Take off cap,screw gun into the can
Hold can UPSIDE DOWN with tube pointing into far end of cavity,slowly press trigger
to distance foam.Test on experimental surface first.
Fill cavity 50% with foam to allow for espansion.
Use PU foam cleaner to remove excess uncured foam on nozzle and valve.
Take free time 10-20 minutes ,cures in 24 hours.
Cured foam can be trimmed,painted,sanded,molded or caulked.
Notice:
Do not hit,burn container.Do not expose or store above 45 ℃,Do not store in auto or expose to direct sunlight.Place in well- ventiated areas.Uncured foam may irritate skin and eyes,therefore,wearprotective gloves clothing and goggle. In case of skin contact,clean immediately.With PU foam cleaner.If foam cures on skin,scrub repeatedly with soap and water to remove.Cured foam is difficult to be moved from skin.Uncured foam is easy to be removed from clothes by use PU foam cleaner.In case of ingestion of foam,consult physician immediately.Do not pierce or burn container even after use. Do not spray on a naked flame or any incandescent material.During use,keep amay from sources of ignition.Contains no formaldehyde.Keep out of the reach of children